The contents of this web site is Copyright © 2002-2004 by Michael Burton. All rights reserved.
The opinions expressed on this web site are the personal opinions of the author.
Interior LED Light - Mounting the circuit board
I used two brass standoffs (the same kind used to mount computer motherboards) to mount the circuit board above the back plate. The back plate itself is the negative side of the circuit. The black wire is the positive side. I soldered a wire to the negative post of the circuit board and wrapped it around the screw that holds the circuit board in place. The black wire is soldered to the circuit board and runs through the switch and out the hole in the back plate.